field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

<h4>What The Role Is</h4>Reporting to the Maintenance Manager, the Solar Technician is responsible for troubleshooting, maintaining, servicing, and repairing solar PV systems and associated equipment. The primary objective is to maintain safe, effective, efficient, and profitable solar PV operation.&nbsp;Pay Ranges by Job Level:Solar Technician I ($54,000 - $77,000)Solar Technician II ($62,000 - $88,000)Solar Technician III ($88,000 - $107,000)<h4>What You'll Be Doing</h4>Level I<ul><li>Assists higher level Technicians in performing maintenance.&nbsp;</li><li>Performs other technical and administrative duties associated with operating and maintaining a power facility.&nbsp;</li><li>Ensures work is performed in accordance with Environmental and Safety requirements.&nbsp;</li><li>Participate in required training, including On-the-Job Training, Self-Study, Computer Based Training and Classroom Training.&nbsp;</li><li>Performs other duties as assigned within the level I scope</li></ul>Level II (Additions)<ul><li>Performs corrective, preventive, and emergency maintenance and operations for which they are qualified to safely and efficiently perform</li><li>Performs work independently and/or in work crews</li><li>Travel required as needed</li><li>Performs other duties as assigned within the level II scope</li></ul>Level III (Additions)<ul><li>Executes routine electrical troubleshooting and repair, instrumentation calibration and troubleshooting</li><li>Performs complex maintenance work such as distributed control systems and inverter troubleshooting as assigned by supervisor based on level of skill and ability</li><li>Complete work orders for the preventive maintenance management system</li><li>Performs corrective, preventive, and emergency maintenance on all PV Solar equipment</li><li>Prepares and implements switching and clearance orders, while working with Operations Center</li><li>Operates all electrical and mechanical PV Solar power plant systems</li><li>Participates in training as required, JHA, PJB, LOTO documentation</li><li>Writes Plant Orders, Plant Procedures, Operating Instructions and other documents as assigned by supervisor</li><li>Ensures work is performed in accordance with Environmental and Safety requirements</li><li>Performs other duties as assigned within the level III scope</li></ul><h4>What You'll Bring</h4>Level I<ul><li>A high school diploma or GED is required or willing to obtain GED within first 6 months of employment.</li><li>Possess demonstrable mechanical aptitude and basic electrical knowledge.</li><li>Understanding of general workplace safety and the ability to follow safety standards, as well as help the company improve upon the standards in place.</li><li>Will drive company vehicle; must have a valid state driver’s license and good driving record.</li><li>Ability to work overtime and non-standard working hours (nights, holidays, weekends), when needed.</li><li>Professionalism and excellent communication skills.</li><li>Ability to operate a computer with technical proficiency of standard business software.</li><li>Knowledge of applicable safety and environmental regulations.</li><li>Able to work both independently and as part of a multi-tasking team.</li></ul>Level II (Additions)<ul><li>1+ years of experience in a power plant or PV Solar O&amp;M/EPC experience</li><li>2+ years of field experience with significant I&amp;E, I&amp;C and/or C&amp;I Electrician experience will be considered in lieu of applicable solar experience</li><li>Demonstrated knowledge of electrical or mechanical fundamentals (single craft journeyman skills) such as electrical measurements, control circuits, and solid state theory application</li><li>Basic knowledge of operational characteristics of equipment and associated control devices installed in power facilities</li><li>Possess demonstrable mechanical aptitude and basic electrical knowledge</li></ul>Level III (Additions)<ul><li>4+ years of PV solar experience is required. I&amp;E, I&amp;C and/or C&amp;I Electrician experience will be considered in lieu of applicable experience.</li><li>Proven experience with a multitude of electrical/construction projects</li><li>Demonstrated knowledge of electrical or mechanical fundamentals (Journeyman skills) such as electrical measurements, control circuits, and solid state theory application</li><li>Knowledge of complex analog and digital instrumentation and control systems</li><li>Proper methods for troubleshooting, repairing, and adjusting instruments and control systems</li><li>Experience administering safe methods to clear equipment, use of tools and plant safety rules</li><li>Understanding reporting procedures and practices and maintenance procedures and practices</li><li>Knowledge of electrical and mechanical prints</li><li>Familiarity with PV Solar plant terminology and nomenclature</li><li>Qualified to perform routine and emergency operations at a solar generation facility and Switchyard</li><li>Able to communicate verbally and in writing and able to work without direct supervision during performance of work</li><li>Able to travel (approximately 5%)</li></ul> <ul><li>If you don’t meet 100% of the above qualifications but see yourself contributing, please submit your resume.</li></ul><h4>What Would Be Nice</h4><ul><li>2-year technical degree or equivalent Journeyman certification/qualifications is preferred</li></ul>Clearway will not sponsor nonimmigrant visas for this position (H-1B, TN, E-3, etc.).The pay rate for the successful candidate will depend on geographic location, skills, relevant and demonstrated experience, education, training and certifications, and other factors permitted by law. This role is eligible to earn an annual cash bonus, subject to personal and company performance goals.Salary Range Across all U.S. Locations$54,000—$107,000 USDClearway Energy Group is leading the transition to a world powered by clean energy. Along with our public affiliate Clearway Energy, Inc., our portfolio comprises approximately 11.6 GW of gross generating capacity in 26 states, including 9.1 GW of wind, solar, and battery energy storage assets, and over 2.5 GW of conventional dispatchable power generation providing critical grid reliability services. As we develop a nationwide pipeline of new energy projects for the future, Clearway’s operating fleet generates enough reliable electricity to power more than 3 million homes today. Clearway Energy Group is headquartered in San Francisco with offices in Denver, Houston, Phoenix, Princeton, and San Diego. For more information, visit clearwayenergygroup.com.Our Commitment to Diversity, Equity, &amp; Inclusion At Clearway, we create a community that isn’t about being the same – it’s about building a team of unique individuals, with different backgrounds &amp; skill sets, coming together to build something big &amp; make a difference in the world. Clearway’s team is dedicated to a clean energy future across a wide spectrum of roles &amp; responsibilities. Embodying our company values and operating principles, unique individuals come together over a common mission. We embrace opportunities to do challenging work that can change the world. We aspire to bring out the best in everyone. We share setbacks, celebrate successes, &amp; act with integrity &amp; accountability to get the job done. Working at Clearway, Hybrid Together Here at Clearway, we’re committed to balancing flexibility while fostering strong relationships with our teammates. We do this by prioritizing new hires based near one of our offices in San Francisco, San Diego, Scottsdale, Houston, Denver, &amp; Princeton. Our office-based employees typically work together from fabulous spaces on Tuesdays &amp; Thursdays to collaborate &amp; learn, build community, get to know one another, &amp; enjoy company-provided meals &amp; events. Clearway Energy is an equal opportunity employer that values a broad diversity of talent, knowledge, experience &amp; expertise. We intentionally foster a culture of inclusion that empowers our employees to deliver superior performance to the communities we serve. We encourage minorities, women, individuals with disabilities &amp; protected veterans to join the team. Clearway is a proud promoter of employment opportunities to our Military &amp; Veterans. What We Provide Clearway offers all eligible employees working 20+ hours per week a comprehensive menu of benefits: generous PTO, medical, dental &amp; vision care, HSAs with company contributions, health FSAs, dependent daycare FSAs, commuter benefits, relocation, &amp; a 401(k) plan with employer match, a variety of life &amp; accident insurances, fertility programs, adoption assistance, generous parental leave, tuition reimbursement, &amp; benefits for employees in same-sex marriages, civil unions &amp; domestic partnerships. For more on Clearway benefits, visit our Benefits Website.Notice to Applicants Clearway Energy is strongly committed to a philosophy of equal opportunity and fully complies with equal&nbsp;employment&nbsp;laws,&nbsp;ordinances and regulations for all applicants and employees. We will make reasonable accommodations to enable individuals with disabilities to apply and compete for employment opportunities for which they are qualified. If you need a reasonable accommodation because of a disability for any part of the employment process, please send an e-mail to&nbsp;<a href="mailto:recruiting@clearwayenergy.com" target="_blank">recruiting@clearwayenergy.com</a>&nbsp;and let us know the nature of your request and your contact information.Notice to California Applicants Clearway Energy is strongly committed to a philosophy of equal opportunity and fully complies with&nbsp;equal&nbsp;employment&nbsp;laws,&nbsp;ordinances and regulations for all applicants and employees.

Clearway Energy Group

Solar Technician

<h4>What The Role Is</h4>Reporting to the Wind Site Manager, the Wind Technician is responsible for assisting in the performance of wind turbine mechanical, hydraulic, and electric component maintenance. The primary objective is to maintain safe, effective, efficient, and profitable wind turbine operation.Wind Technician levels are defined below, and the ranges will be determined based on the qualifications met.Pay Ranges by Job Level:Wind Technician I ($45,000 - $66,000)Wind Technician II ($52,000 - $74,000)Wind Technician III ($63,000 - $90,000)<h4>What You'll Be Doing</h4>Level I<ul><li>Follow safety procedures, observe safe working practices and maintain a safe working environment.</li><li>Assist in the performance of wind turbine mechanical, hydraulic, and electrical component maintenance.</li><li>Documents all work performed, parts used and time spent using computer based service reporting procedures.</li><li>Assist in troubleshooting and repair of SCADA communication systems.</li><li>Operate and maintain a service vehicle.</li><li>Maintain hand tools in good working order and well organized.</li><li>Work a flexible on call schedule when needed. This may include weeknights, weekends, and holidays.</li><li>Willingness to progress as a technician and take guidance from superiors.</li><li>Help in all areas of site operations as directed by Site Lead and Site Manager with minimal supervision.</li><li>Work a flexible on call schedule when needed. This may include weeknights, weekends, and holidays.</li><li>Other duties as assigned within the level I scope</li></ul>Level II &amp; III (additions)<ul><li>Troubleshoot complicated mechanical, hydraulic, and electrical problems on variable pitch, variable speed wind turbines.</li><li>Assist in the training and development of lower level operation and maintenance personnel.</li><li>Perform all mechanical, hydraulic, and electrical component maintenance, repair and replacement to correct malfunctions.</li><li>Read and understand electrical schematics and wiring diagrams.</li><li>Use electrical test equipment to assist in troubleshooting and testing.</li><li>Lead maintenance and troubleshooting crews as necessary.</li><li>Safely perform LOTO and mentor lower level technicians in LOTO.</li><li>Perform balance of plant and switchyard work as required.</li><li>Other duties as assigned within the level II or III scope respectively</li></ul><h4>What You'll Bring</h4>Level I<ul><li>A high school diploma or GED required or willing to obtain within the first 6 months of employment.</li><li>Able to climb towers unassisted up to 300 feet. Job will require standing outside the nacelle and nosecone at the top of the turbine. Able to work safely in a confined space.</li><li>Must possess a valid driver's license and good driving record.</li><li>Possess demonstrable mechanical aptitude and basic electrical knowledge. Able to work with electrical wires and differentiate between color coded wires.</li><li>Able to safely work in a wide range of adverse climates and environments.</li><li>Able to travel as required.</li><li>Knowledge of and the ability to use various hand tools.</li><li>Ability to read schematics and wiring diagrams is preferred.</li><li>Able to communicate verbally and in writing and able to work without direct supervision during performance of work.</li><li>Able to create, edit or modify Microsoft Word and Excel documents.</li><li>Able to meet the requirements of Clearway Energy Group’s Qualified Electrical Worker program.</li></ul>Level II (Additions)<ul><li>An Associate’s degree (electrical or technical) and six months turbine experience, or a high school diploma/GED and one-year wind turbine experience</li><li>Able to work with electrical wires and differentiate between color coded wires.</li><li>Have an in depth understanding of the different components of the wind turbine including the electrical&nbsp;pitch system, computerized control system, and the power conversion unit as well as knowledge and understanding of OEM approved mechanical maintenance methods and practices.</li><li>Possess the skills to perform mechanical and electrical equipment repairs.</li></ul>Level III (Additions)<ul><li>An Associate’s degree (electrical or technical) and two years turbine experience, or a high school diploma/GED and three-year wind turbine experience</li></ul>If you don’t meet 100% of the above qualifications but see yourself contributing, please submit your resume.<h4>What Would Be Nice</h4><ul><li>Previous experience in SAP is preferred.</li></ul>Clearway will not sponsor nonimmigrant visas for this position (H-1B, TN, E-3, etc.).The pay rate for the successful candidate will depend on geographic location, skills, relevant and demonstrated experience, education, training and certifications, and other factors permitted by law. This role is eligible to earn an annual cash bonus, subject to personal and company performance goals.Salary Range Across all U.S. Locations$45,000—$90,000 USDClearway Energy Group is leading the transition to a world powered by clean energy. Along with our public affiliate Clearway Energy, Inc., our portfolio comprises approximately 11.6 GW of gross generating capacity in 26 states, including 9.1 GW of wind, solar, and battery energy storage assets, and over 2.5 GW of conventional dispatchable power generation providing critical grid reliability services. As we develop a nationwide pipeline of new energy projects for the future, Clearway’s operating fleet generates enough reliable electricity to power more than 3 million homes today. Clearway Energy Group is headquartered in San Francisco with offices in Denver, Houston, Phoenix, Princeton, and San Diego. For more information, visit clearwayenergygroup.com.Our Commitment to Diversity, Equity, &amp; Inclusion At Clearway, we create a community that isn’t about being the same – it’s about building a team of unique individuals, with different backgrounds &amp; skill sets, coming together to build something big &amp; make a difference in the world. Clearway’s team is dedicated to a clean energy future across a wide spectrum of roles &amp; responsibilities. Embodying our company values and operating principles, unique individuals come together over a common mission. We embrace opportunities to do challenging work that can change the world. We aspire to bring out the best in everyone. We share setbacks, celebrate successes, &amp; act with integrity &amp; accountability to get the job done. Working at Clearway, Hybrid Together Here at Clearway, we’re committed to balancing flexibility while fostering strong relationships with our teammates. We do this by prioritizing new hires based near one of our offices in San Francisco, San Diego, Scottsdale, Houston, Denver, &amp; Princeton. Our office-based employees typically work together from fabulous spaces on Tuesdays &amp; Thursdays to collaborate &amp; learn, build community, get to know one another, &amp; enjoy company-provided meals &amp; events. Clearway Energy is an equal opportunity employer that values a broad diversity of talent, knowledge, experience &amp; expertise. We intentionally foster a culture of inclusion that empowers our employees to deliver superior performance to the communities we serve. We encourage minorities, women, individuals with disabilities &amp; protected veterans to join the team. Clearway is a proud promoter of employment opportunities to our Military &amp; Veterans. What We Provide Clearway offers all eligible employees working 20+ hours per week a comprehensive menu of benefits: generous PTO, medical, dental &amp; vision care, HSAs with company contributions, health FSAs, dependent daycare FSAs, commuter benefits, relocation, &amp; a 401(k) plan with employer match, a variety of life &amp; accident insurances, fertility programs, adoption assistance, generous parental leave, tuition reimbursement, &amp; benefits for employees in same-sex marriages, civil unions &amp; domestic partnerships. For more on Clearway benefits, visit our Benefits Website.Notice to Applicants Clearway Energy is strongly committed to a philosophy of equal opportunity and fully complies with equal&nbsp;employment&nbsp;laws,&nbsp;ordinances and regulations for all applicants and employees. We will make reasonable accommodations to enable individuals with disabilities to apply and compete for employment opportunities for which they are qualified. If you need a reasonable accommodation because of a disability for any part of the employment process, please send an e-mail to&nbsp;<a href="mailto:recruiting@clearwayenergy.com" target="_blank">recruiting@clearwayenergy.com</a>&nbsp;and let us know the nature of your request and your contact information.Notice to California Applicants Clearway Energy is strongly committed to a philosophy of equal opportunity and fully complies with&nbsp;equal&nbsp;employment&nbsp;laws,&nbsp;ordinances and regulations for all applicants and employees.

Wind Technician

About Howmet Aerospace Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at <a href="http://www.howmet.com/esg-report" target="_blank">www.howmet.com/esg-report</a>. Howmet Fastening Systems is looking for a Quality Tech II, Raw Materials&nbsp;in our Torrance, CA location. HFS is a business unit of Howmet Aerospace, headquartered in Torrance, California.&nbsp; We hold the number one global position in aerospace fastening systems, and we’re the North American leader in commercial transportation fasteners. Our high-tech, multi-material fastening systems are found nose to tail on aircraft and aerospace engines. Our products are also critical components of industrial gas turbines, automobiles, commercial transportation vehicles, and construction and industrial equipment. General Summary: Personnel are directly Involved in the inspection of raw material certification against industry and internal standards. The incumbent will use precision inspection tools (micrometers and calipers), industry material specifications, internal specifications and procedures/instructions in their activities to ensure acceptance of product to specifications and requirements. Incumbent may be required to use alloy verification equipment designed to verify the chemistry and alloy type of incoming raw material. Incumbent will use various computer programs to document the review and acceptance of raw material. Specific Responsibilities: <ul><li>Enter data into various systems to document review</li><li>Perform Dimensional Inspection of raw material using basic inspection tools</li><li>Compare certification, or what they gave us, to specification, or what we asked for</li><li>Active involvement in process improvement initiatives&nbsp;</li><li>Keep work area clean, safe and in orderly fashion</li><li>Comply with all safety policies, procedure, and practices. Report all unsafe activities to supervisor and/or Human Resources</li><li>Participate in proactive team effort to achieve departmental and company goals</li><li>Perform other duties as assigned</li><li>Comply with all safety policies, procedures and practices as it relates to office/production working environments i.e. PPE (Personal Protective Equipment) when entering production environment</li><li>Light physical activity level performing non-strenuous daily activities of an administrative nature (30 Lbs max lifting may be required).</li><li>All shifts may be required to work mandatory overtime to meet business needs.&nbsp;</li></ul> Skills and Knowledge: <ul><li>Must be able to read, understand and interrupt industry and internal work instructions</li><li>Must be able to use a micrometer</li><li>Must be able to use alloy verification test equipment</li><li>Must be able to document test results and review materials certifications</li><li>Must have attention to detail and be quality minded</li><li>Must be able to follow directions and communicate with customer or 3rd party auditors</li><li>Must follow all Enviromental safety requirements</li></ul> Education: High School diploma or General Education Degree (GED) preferred Experience and Background: <ul><li>Minimum 3 years of related experience and/or training </li><li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul> Benefits/Salary: The position includes competitive wages and a comprehensive benefits package, including health insurance (medical, dental, vision), excellent 401k matching program, paid holidays and vacation.&nbsp;Howmet Aerospace curates a strong working environment through opportunities for career progression, community engagement activities, and flexible schedules contingent upon role and location. The salary range for this position is $22.00-$30.00. Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Howmet Aerospace

Quality Technician II, Raw Materials

Howmet Aerospace&nbsp;is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company’s primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation. Howmet Aerospace is transforming the next phase of more fuel-efficient, quieter aerospace engines and sustainable ground transportation. For more information, visit&nbsp;<a>www.howmet.com</a>. Follow @howmet:&nbsp;Twitter,&nbsp;Instagram,&nbsp;Facebook,&nbsp;LinkedIn&nbsp;and&nbsp;YouTube. This Automation Technician will be in our Plant 4, Thermatech Operations.&nbsp;This position will provide oversight for sustaining operation and repair of automated equipment. They will assist product, process and manufacturing engineers to improve operating processes, cycle times, quality, OEE &amp; labor utilization by use of automating processes. Basic Qualifications: <ul><li>High school diploma or GED from an accredited institution.</li><li>Minimum of one year working in an engineering or manufacturing environment.</li><li>Employees must be legally authorized to work in the United States. &nbsp;Verification of employment eligibility will be required at the time of hire. &nbsp;Visa sponsorship is not available for this position.</li></ul> Preferred Qualifications <ul><li>Associate Degree in a technical discipline.</li><li>Hands-on relevant experience evaluating automated equipment and processes and solving automated equipment issues.</li><li>Robotic programming skills to refine movement using various controllers.</li><li>Good oral and written communication skills.</li><li>Must be PC literate in Microsoft Word and Excel.</li><li>Good mechanical and/or electrical aptitude.</li><li>Experience using industrial controllers.</li><li>Ability to read mechanical prints and electrical prints.</li><li>Good methodical aptitude for troubleshooting equipment and related issues.</li><li>Must be organized with the discipline to solve problems with permanent solutions.</li></ul> Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

AUTOMATION TECHNICIAN - Thermatech

Howmet Aerospace in Branford, CT is currently hiring highly motivated and energetic candidates to join their team. Howmet Aerospace is a leading provider of advanced engineered solutions for the aerospace and transportation industries worldwide. The Branford facility is focused on producing jet engine components that are essential for mission-critical performance and efficiency in aerospace and defense applications. With over 50 years of experience in the Branford facility, we are proud to contribute to the development of more fuel-efficient, quieter aerospace engines, and sustainable ground transportation. For more information, please visit <a>www.howmet.com</a>. Follow @howmet:&nbsp;Twitter,&nbsp;Instagram,&nbsp;Facebook,&nbsp;LinkedIn&nbsp;and&nbsp;YouTube. Job Summary We are currently looking for a candidate to fill the roles of Materials Support Technician.&nbsp; This hybrid role is responsible for a variety of operational-critical activities.&nbsp; The primary responsibility will be the management of materials inventory and materials waste removal. This role will work in coordination with various departments to control and maintain materials and supplies to support production activities.&nbsp; The position is also responsible for following all waste-generating processes to ensure compliance. Job Responsibilities Materials Supply Crib <ul><li>Manage and control supplies and materials in the main facility&nbsp;</li><li>Monitor, distribute, and maintain records for all shop materials and supplies.</li><li>Collaborate with corporate purchasing for various tasks including quotes, requisitions, approved supplier maintenance, alternative vendors, etc.</li><li>Work with quality to maintain material testing, certification of material status, the release of material to production, and other responsibilities pertaining to adhering to our quality procedures and standards.</li><li>Collaborate with the Controller to maintain inventory integrity, reduce cost, and ensure dual souring where possible.</li><li>Maintain accurate record keeping in Oracle with issues and receipts.</li><li>Input requisitions into Oracle to support facility purchases.</li></ul> EHS <ul><li>De-Ionized (DI) water systems <ul><li>Manage and control supplies for system.</li><li>Perform visual inspections of the system.</li></ul></li><li>Dust collectors and mist collectors <ul><li>conduct weekly inspections including:&nbsp; <ul><li>Check covers and duct work for signs of leakage.</li><li>Check compressed air pulse regulators and collection drums.&nbsp;</li><li>Check and document photohelic and magnehelic readings.</li><li>Communicate with supervisor when filters need changed.</li></ul></li></ul></li><li>Closed Loop Water Systems &amp; Magnus Part Washer <ul><li>Pump out and clean systems.</li><li>Replenish closed loop water system(s) as needed.</li></ul></li><li>Environmental Emergency On-Site Response <ul><li>Weekly inspections of emergency response equipment and materials.</li><li>Perform maintenance of emergency response equipment.</li><li>Respond to, clean-up/coordinate cleanup of environmental emergencies (as needed) with consultation of EHS Engineer/Manager.</li></ul></li><li>Wastewater &amp; Stormwater <ul><li>Assist with all wastewater system operation, calibration, and sampling duties</li></ul></li><li>Waste Stream Containers, Tank, &amp; Storage Areas&nbsp;</li><li>Collect and transport all full waste stream containers in facility to their respective locations and replenish containers.</li><li>Perform and document inspections of all waste stream point of generation locations in facility</li><li>All other duties as assigned by management.</li></ul> Minimum Qualifications <ul><li>High school diploma or GED from an accredited institution.</li><li>One (1) year experience working in a manufacturing or similar environment,</li><li>Candidate must be able to read and write in English.</li><li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li><li>This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.</li></ul> Preferred Qualifications <ul><li>Bachelor’s degree preferred.&nbsp;</li><li>Experience ordering and managing supplies in a business setting strongly desired.</li></ul> Skills and Abilities: <ul><li>Ability to operate a computer using various Windows applications such as: Microsoft Word and Excel, Oracle, and specialty systems like RFMS.&nbsp; Good telephone and verbal communication skills.</li><li>Ability to read, write and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals, all written in English.&nbsp;</li><li>Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.&nbsp;</li><li>Ability to maneuver mobile forklift to load and unload trucks.&nbsp; Follow all Howmet Branford mobile equipment safety policies.&nbsp;</li><li>Result driven and accountable for actions, work independently.</li><li>Views safety as a way of life. Must be able to lift to 50 pounds.&nbsp;</li><li>This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.S. person status. ITAR defines U.S. person as an U.S. Citizen, U.S. Permanent Resident (i.e., 'Green Card Holder'), Political Asylee, or Refugee. Verification of employment eligibility will be required at the time of hire.</li><li>​Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.</li></ul> Salary &amp; Benefits <ul><li>Compensation starts at $22.75/hr. and may vary based on experience, skills, and qualifications.</li><li>External hires are eligible for a $1,000 sign on bonus.</li><li>Benefit package includes, Medical, Dental, Visual, vacation, and more eligible from day one.</li><li>Excellent benefits/401K vested from day one.</li></ul> Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Materials Support Technician

Howmet Aerospace, headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. The Company’s primary businesses focus on jet engine components, aerospace fastening systems and titanium structural parts necessary for mission-critical performance and efficiency in aerospace and defense applications, as well as forged wheels for commercial transportation. Howmet Aerospace is transforming the next phase of more fuel-efficient, quieter aerospace engines and sustainable ground transportation. For more information, visit&nbsp;<a>www.howmet.com</a>. Follow @howmet:&nbsp;Twitter,&nbsp;Instagram,&nbsp;Facebook,&nbsp;LinkedIn&nbsp;and&nbsp;YouTube. Howmet has challenging opportunities for individuals who are excited to engage with us in growing our business. Join us where you will be part of a dedicated team to manufacture high tech products, safely, accurately and efficiently, you will perform a variety of hands-on operations in accordance with standardized processes within customer specifications. Job Summary Performs and/or coordinates laboratory tests to determine chemical and physical characteristics of alloy (metallic) and non-alloy (non-metallic) materials for such purposes as quality control, process control, or product development and production. Essential Job Functions &amp; Responsibilities: While performing the duties of this job the employee is required to follow all Howmet’s safety regulations, work rules, along with handbook and all departmental specific requirements. <ul><li>Monitor and manage incoming alloy master heats. Facilitate the casting of test material, heat treatment, test bar machining, and testing to specification requirements.&nbsp; Requires use of LIMS computer system. Record test results, track progress of testing, issue retest based on testing results, obtain and issue finished report, and generate master heat certifications.&nbsp; Release alloy to production.</li><li>Performs chemical and physical testing of non-metallic materials to specifications and/or submits samples for testing at Howmet Research Center (HRC) testing facility. Coordination required with internal customers (QA, Engineering, etc.), material suppliers, and HRC.</li><li>Coordination of alloy testing samples required with machining suppliers and HRC testing facility.</li><li>Review internal and customer specifications as it relates to testing requirements.</li><li>Communicate with HRC on their techniques and materials, as well as understand and utilize the corporate manuals.</li><li>Operate laboratory equipment and instruments as required for designated assignments. Equipment may include, but is not limited to, wet saws, polishing machines, microscopes, centrifuges, chemical balance scales, PH meters and other equipment.</li><li>Prepares chemical solutions according to standard formulas.</li><li>Review COC/COA (certificate of compliance or analysis) of incoming raw materials against corporate manual specifications before releasing materials to production.</li><li>Maintain testing schedules, organization, and documentation. Use of LIMS system.</li><li>Must comply with all company attendance policies and guidelines; this includes, but is not limited to, regular attendance and overtime (after hour or weekend) in support of production requirements.</li><li>Other duties as assigned to include the training for back-up responsibilities of other laboratory technicians.</li></ul> Skills &amp; Abilities <ul><li>There are no licenses, or registrations required for this position.&nbsp; After appropriate training, employee must be certified/qualified for techniques as required by customer specifications (internal/external).</li><li>Strong computer skills using MS Office, and internal computer systems such as LIMS, lot trace, OCHMS, IPC, or other systems introduced to this facility.</li><li><a>Excellent verbal and written communication skills preferred. Ability to write routine reports and correspondence.&nbsp;</a></li><li>Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.</li><li>Ability to add subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret graphs.</li><li>Ability to understand when to stop and seek help prior to initiating the task if there is a question or inability to proceed.</li><li>Ability to deal with problems involving several variables in standardized situations.</li></ul> Minimum Qualifications: <ul><li>This position requires a minimum of a high school diploma or general education degree (GED). An Associates or Advanced degree is preferred.</li><li>Must be able to provide documentation in the original form establishing both your identity and your employment eligibility in the U.S.</li><li>This position entails access to export-controlled items you must be able to lawfully obtain access to such items.</li></ul> Preferred Qualifications: <ul><li>A minimum of one-year related experience with mechanical aptitude, laboratory environment and functions, and/or training in a metallographic lab.</li><li>An Associates or Advanced degree.</li></ul> Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Laboratory Technician

Job Summary: We are seeking a skilled and proactive Maintenance Technician to join our team. The ideal candidate will be responsible for performing routine maintenance, repairs, and troubleshooting of various systems and equipment to ensure optimal functionality and safety within our facilities. This role requires a hands-on approach and the ability to work both independently and collaboratively. Key Responsibilities: <ul><li>Conduct regular inspections of buildings and equipment to identify maintenance needs.</li><li>Perform preventive maintenance on HVAC, plumbing, PLC, electrical, and mechanical systems.</li><li>Troubleshoot and repair issues related to facility equipment and systems.</li><li>Inspect, dismantle, and repair machinery as needed.</li><li>Diagnose problems using precision measuring tools and techniques.</li><li>Respond promptly to maintenance requests and work orders from staff.</li><li>Maintain accurate records of maintenance activities and repairs performed.</li><li>Maintain inventory of equipment and supplies using Bigfoot CMMS.</li><li>Assist in the setup and teardown of facilities for events and activities.</li><li>Operate machinery to verify repairs and functionality.</li><li>Follow safety protocols and guidelines to ensure a safe work environment.</li><li>Collaborate with other team members and departments as needed.</li><li>Stay current with industry trends and advancements in maintenance techniques.</li><li>Maintain a safe and clean work environment.</li><li>Perform other duties as assigned, including operating the wastewater treatment plant when necessary.</li></ul> Basic Qualifications <ul><li>High school diploma or equivalent; technical certification or degree in a related field is a plus</li><li>A minimum of 3 years maintenance experience in a manufacturing environment</li><li>Strong knowledge of HVAC, plumbing, electrical systems, and general repair techniques.</li><li>Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position</li></ul> Preferred Qualifications <ul><li>Journeyman or Master Electrician license</li><li>Familiarity with industrial electrical systems and the National Electrical Code</li><li>Ability to read and interpret manuals; knowledge of math and measuring instruments.</li><li>Familiarity with equipment maintenance, HVAC, hydraulic systems, plumbing, electronic diagnostics, and fabrication (welding, grinding).</li><li>Basic computer skills, including Microsoft Office and Bigfoot CMMS.</li><li>Strong problem-solving, communication skills, and teamwork ability.</li><li>&nbsp;Obtain and maintain forklift and man lift/crane authorization.</li><li>&nbsp;Capable of climbing ladders (up to 25 feet), standing, crouching, kneeling, and working overhead for extended periods.</li><li>Complete first responder training; ability to enter confined spaces and walk on uneven surfaces.</li></ul> Candidates should demonstrate technical knowledge, urgency, and adaptability. Howmet Aerospace Inc. (NYSE: HWM), headquartered in Pittsburgh, Pennsylvania, is a leading global provider of advanced engineered solutions for the aerospace and transportation industries. Our primary businesses focus on jet engine components, aerospace fastening systems, titanium structural parts and forged wheels. With $6.6 billion in revenue in 2023, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers’ success and making a positive impact on the world. To learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2023 Environmental Social and Governance report at&nbsp;<a>www.howmet.com/esg-report</a>. Follow: <a>LinkedIn</a>, <a>Twitter</a>, <a>Instagram</a>, <a>Facebook</a>, and <a>YouTube</a>. Equal Opportunity Employer: Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email&nbsp;<a href="mailto:TalentAcquisitionCoE_Howmet@howmet.com" target="_blank">TalentAcquisitionCoE_Howmet@howmet.com</a>

Production Machine Mechanic

<h4>Overview</h4>The Installation Technician is responsible for ensuring the successful installation of commercial kitchen equipment and exceptional service delivery to our customers. While performing the duties of this role, the Installation Technician must comply with all applicable health and safety regulations, policies, and established work practices. This position receives direction and close supervision from the Foreman and/or Project Managers.<h4>Responsibilities</h4><ul><li>Safely deliver, uncrate, assemble, and install commercial kitchen equipment at customer sites while ensuring full functionality in accordance with product specifications. Equipment includes but is not limited to walk-in coolers, freezers, hoods, ice-machines, and ovens.&nbsp;</li><li>Load and unload equipment and tools properly for equipment delivery and installation.&nbsp;</li><li>Hang and secure shelving, racking, and other wall or ceiling products.&nbsp;</li><li>Ensure all work documentation is fully and accurately completed (i.e. job progress and hours worked).&nbsp;</li><li>Attend required safety training.&nbsp;</li></ul>*The duties and responsibilities described are not necessarily an exhaustive list. Additional duties may be assigned to the employee as necessitated by business demands. <h4>Ideal Candidate Will Possess the Following Skills and Abilities</h4><ul><li>High school diploma or equivalent. Vocational school diploma/certificate in a mechanical-related field is preferred but not required.</li><li>Experience using basic hand and power tools.</li><li>Must possess strong problem solving, communication, basic math, attention- to detail, and customer service skills; Must be a team-player with a positive attitude and have a strong-work ethic.</li><li>Must have a valid-driver’s license and be able to successfully pass a criminal background and motor vehicle record checks; Must be able to obtain certification to drive fork lifts; Must have basic computer skills. Must be able to work overtime as required.</li><li>This position requires heavy lifting of 50 lbs or more. It involves frequent speaking, hearing, standing, walking, bending, reaching, stooping, pushing, climbing, and crouching. Requires close and peripheral vision and depth perception. May be exposed to vibrations, loud noise, and hazardous materials.</li><li>Work may be performed in extreme hot and cold temperatures in both indoor and outdoor environments. </li><li>The work schedule requires Installation Technicians to work varying hours - including early morning.&nbsp;</li><li>This position requires daily paid travel while driving company vehicles.&nbsp;</li></ul>At Singer Equipment Company, we value each and every one of our dedicated sales staff and therefore are pleased to offer a competitive starting wage, a comprehensive benefits package including: medical, dental, vision, short term and long term disability, 401K with company match, group life insurance, flexible spending, paid time off, and paid holidays.&nbsp;EOE/M/F/Veterans/Disability

Singer Equipment Co

Singer Equipment

Installation Technician-

H.O. Penn MachineryHIRING IMMEDIATELYWelder/Fabricator, Mechanic – Construction Equipment&nbsp;Holtsville, NY Pay: $45.71 - $56.34/hour (dependent on experience and skillset) Benefits:<ul><ul><li>UNION SHOP</li><li>Welfare, annuity, pension, vacation funds, &amp; company contributions&nbsp;</li><li>Medical/dental/vision insurance</li><li>Paid company holidays</li></ul></ul>Key qualifications:<ul><li>Minimum 3+ years welding experience required, (heavy equipment and metal fabrication experience highly preferred)</li><li>Machinist / line boring experience a plus&nbsp;</li><li>Must be computer literate and able to learn new systems</li><li>Excellent verbal and written communication skills</li><li>Must be able to troubleshoot technical problems, meet or exceed labor repair guidelines, possess the ability to plan and efficiently complete assigned tasks</li><li>Valid Driver’s License (for as needed travel to customers)</li><li>CDL license a plus</li></ul>Responsibilities:Successfully provide service of recognized superior value&nbsp;<ul><li>Troubleshoot problems</li><li>Efficiently utilize resources to correct problems</li><li>Document steps taken to correct problems </li></ul>Maximize the efficient use of service and welding processes to provide fast accurate service and minimize unnecessary expense<ul><li>Plan proper welding and fabrication procedures for efficiency</li><li>Efficiently utilize tooling and technical resources</li><li>Continually improve key processes</li><li>Effectively communicate status of welding work with supervisor </li></ul>A culture that focuses on safety and safe work habits<ul><li>Be an active part in the continuous improvement of H.O. Penn’s safety culture</li><li>Timely completion of any required safety training for self</li><li>Adherence to all Environmental, Health, and Safety Policies</li><li>Understand job risks and take appropriate steps to mitigate those risks, such as wearing all required personal protective equipment as required by task</li></ul>Qualifications:<ul><li>Minimum 3+ years welding experience required, (heavy equipment and metal fabrication experience highly preferred)</li><li>Machinist / line boring experience a plus&nbsp;</li><li>Must be computer literate and able to learn new systems</li><li>Excellent verbal and written communication skills</li><li>Must be able to troubleshoot technical problems, meet or exceed labor repair guidelines, possess the ability to plan and efficiently complete assigned tasks</li><li>Valid Driver’s License (for as needed travel to customers)</li><li>CDL license a plus </li></ul>Physical Requirements:<ul><li>Standing and walking</li><li>Lifting (up to 60lbs.)</li><li>Carrying (up to 50lbs.)</li><li>Push/pull (up to 80lbs.)</li><li>Sitting, rotation and forward bending (sitting and standing)</li><li>Hand coordination and reaching</li><li>Grip (30lbs. with both hands, 80lbs. with preferred/single hand)</li><li>Foot pedal operation</li><li>Climbing stairs and ladders</li><li>Crawling, low work (kneeling), and awkward positioning</li><li>Outdoor work (as required)</li><li>Wearing 10-20lbs. of protective clothing, including fire resistant clothing, welding helmet/shield, &amp; ANSI-rated protective footwear (as required) </li></ul>We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, creed, color, religion, sex, national origin, ancestry, age, marital status, citizenship, sexual orientation, gender or gender status, disability, genetic information, otherwise qualified disabled or veteran status, or any other protected class as designated by Federal, State and/or local law.

Welder/Fabricator, Mechanic – Construction Equipment

<h4>Thanks for your interest in Children's Mercy!</h4>Do you envision finding a meaningful role with an inclusive and compassionate team? At Children’s Mercy, we believe in making a difference in the lives of all children and shining a light of hope to the patients and families we serve. Our employees make the difference, which is why we have been recognized by U.S. News &amp; World Report as a top pediatric hospital, for eleven consecutive years. Children’s Mercy is in the heart of Kansas City – a metro abounding in cultural experiences, vibrant communities and thriving businesses. This is where our patients and families live, work and play. This is a community that has embraced our hospital and we strive to say thanks by giving back. As a leader in children’s health, we engage in meaningful programs and partnerships throughout the region so that we can improve the lives of children beyond the walls of our hospital.<h4>Overview</h4>Facilitate the movement of supplies and equipment through the organization based on user requests. At Children’s Mercy, we are committed to ensuring that everyone feels welcomed within our walls. A successful candidate for this position will join us as we strive to create a workplace that reflects the community we serve, as well as our core values of kindness, curiosity, inclusion, team and integrity. Additionally, it’s important to us that we remain transparent with all potential job candidates. Because we value the safety of the patients and families we serve, as well as the Children’s Mercy staff, we want to let you know that the seasonal influenza vaccine is a condition of employment for all employees in our organization. New employees must be willing to be vaccinated if found non-immune to measles, mumps, rubella (MMR) and chicken pox (varicella) and/or without evidence of tetanus, diphtheria, acellular pertussis (Tdap) vaccination since 2005. If you are selected for this position, you will be asked to supply your immunization records as proof of vaccination. If you and have any concerns about receiving these vaccines, medical and/or religious exemptions can be further discussed with Human Resources.<h4>Responsibilities</h4><ul><li>- Linen Distribution</li><li>- Supplemental Linen Distribution. Not all linen deliveries will be scheduled. Sometimes supplemental linen supply will be needed to top off linen levels for a department. Either it will be delivered to an already established linen distribution schedule or it might be a special request for a department. Linen techs will be required to receive special linen requests through either phone or email. They are required to fill these special linen orders and report those out as well.</li><li>- Processes linen delivery paper work into computer.</li><li>- Stocking of linen inventory in linen rooms The linen rooms house all the of the linen for the distribution of linens to all linen receiving locations. Linen must be stocked either before the shift begins or after the shift is over. Morning or evening stocking will be contingent on a need by need basis. The dock will receive bulk linen for the hospital daily and the tech will be responsible for its transportation to the linen rooms as well as the stocking of linen inventory. Occasionally, linen items will have to be folded/refolded. The techs will be required to proficient with this task as well.</li><li>Fills emergency stock and patient care orders.</li></ul><h4>Qualifications</h4><ul><li>HS diploma or equivalent or 1-2 years experience </li></ul><h4>Benefits at Children's Mercy</h4>The benefits plans at Children’s Mercy are one of many reasons we are recognized as one of the best places to work in Kansas City. Our plans are designed to meet the changing needs of our employees and their families. Learn more about Children’s Mercy benefits. <h4>Starting Pay</h4>Our pay ranges are market competitive. The pay range for this job begins at $17.65/hr, but your offer will be determined based on your education and experience.<h4>Remote Work/Work from Home</h4> This position is not eligible to work remotely, which means that the person hired will be required to work onsite at one of our Children’s Mercy locations and may not work from home.<h4>EEO Employer/Disabled/Vet</h4>Children’s Mercy hires individuals based on their job skills, expertise and ability to maintain professional relationships with fellow employees, patients, parents and visitors. A personal interview, formal education and training, previous work experience, references and a criminal background investigation all are factors used to select the best candidates. The hospital does not discriminate against prospective or current employees based on the race, color, religion, sex, national origin, age, disability, creed, genetic information, sexual orientation, gender identity or expression, ancestry or veteran status. A drug screen will be performed upon hire. Children’s Mercy is smoke and tobacco free.<h4>Our commitment to Diversity &amp; Inclusion</h4>CM is committed to creating a diverse and inclusive workforce. Our patients and families come from all walks of life, and so do we. We know that our greatest strengths come from the people who make up our team so we hire great people from a wide variety of backgrounds, not just because it’s the right thing to do, but because it makes our hospital stronger and our patient care more compassionate.If you share our values and our enthusiasm for service, you will find a home at CM. In recruiting for our team, we welcome the unique contributions that you can bring, including education, ideas, culture, ethnicity, race, sex, sexual orientation, gender identity and expression, national origin, age, languages spoken, veteran status, color, religion, disability and beliefs.<h4>Need help finding the right job?</h4>We can recommend jobs specifically for you!Click here to get started.

1, 159 Technician Jobs