field_job_employment_type

job_industry

field_job_occupational_field_parents_all

job_organization_name

Company Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. Please visit our website for more information - <a href="http://www.veolianorthamerica.com" target="_blank">www.veolianorthamerica.com</a> Job Description Position Purpose: Responsible for safely transporting hazardous and non-hazardous materials from the customer site to the appropriate designated sites using van trailers, straight trucks, flatbeds, tankers, roll-off frames, or other waste carrying equipment. Ensures that the condition of the material packaging meets the U.S. Department of Transportation (DOT) specifications, inspects manifests and shipping paperwork for accuracy, and maintains current transportation permits for all areas traveled. Abides by all regulations set forth by DOT, EPA, state and local governments, and VES-TS policies and procedures. Primary Duties /Responsibilities: <ul><li>Perform daily inspections of vehicle and/or trailer prior to driving to ensure the safety and integrity of equipment going to designated sites.</li><li>Prior to transporting materials reviews shipment records, manifests, container labeling, vehicle placards, and integrity of loaded drums, roll-off boxes or bulk tankers.</li><li>Driving within the local market, ensures that DOT requirements such as load weight limits, driver log books, Vehicle Inspection Records, transportation permits, insurance cards, fuel trip reports, IFTA fuel stickers, or other paperwork is up to date and valid.</li><li>Consults with customers pertaining to load conditions, drum counts or paperwork inconsistencies to ensure that materials can be properly transported to designated site(s).</li><li>Notify immediate supervisor of any moving violations and/or accidents in-route to and/or from sites. </li><li>Assist in the loading/unloading of materials at designated sites utilizing appropriate equipment. </li><li>Responsible for assisting with housekeeping as required.</li><li>Other duties as assigned</li></ul> Qualifications Education / Experience / Background: <ul><li>High School diploma or General Educational Development (GED) required </li><li>Prior commercial driving experience required</li></ul> Knowledge / Skills / Abilities: <ul><li>Familiarity with U.S. Department of Transportation (DOT) regulations pertaining to the transportation of hazardous and non-hazardous materials</li><li>Strong team player</li><li>Excellent interpersonal and communication skills</li><li>Time management: the ability to organize and manage multiple tasks</li><li>Strong customer service orientation</li></ul> Required Certification / Licenses / Training: <ul><li>Valid Class B Commercial Driving License (CDL) as required</li><li>Hazmat (H) endorsement required</li><li>40-Hour HAZWOPER training preferred</li></ul> Additional Information Targeted Hourly Pay: $30 Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave - 56 hours; Observed Holidays - 11 days; Vacation - 15 days Eligible for up to 4% annual performance bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Local Driver Class B

ABOUT ROCKET LABRocket Lab is a global leader in launch and space systems. The rockets and satellites we build and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has provided reliable access to orbit since 2018, becoming one of the most frequently launched rockets in the world. Neutron will be our next rocket on the launch pad, an advanced 13-tonne payload class, reusable rocket to launch the mega constellations of the future. Our space systems business includes our extensive line of satellites and components that have enabled more than 1,700 missions including the James Webb Space Telescope, NASA Psyche Mission, Artemis I, Mars Ingenuity helicopter, and more. &nbsp;Join our pioneering team and launch your career to new heights!SPACE SYSTEMS&nbsp;Rocket Lab’s Space Systems team is responsible for every satellite and satellite component made by Rocket Lab: from complete satellites destined for missions to the Moon and Mars, to the individual components and subsystems that make up a satellite like solar panels, flight software, reaction wheels and star trackers, separation systems, radios, and more. Our Space Systems team is made up of engineers, technicians, and designers who design, create, and put together our own satellites for missions across the commercial, government, and defense sectors, or who build and assemble satellite hardware and software that supports other satellite missions.TECHNICIAN I-IV, COMPOSITESAs a Composites Technician based at Rocket Lab’s site in Albuquerque, New Mexico, you will have the opportunity to support basic composite layouts on parts or assemblies to establish reference points and check dimensions using precision tools. In this role you will work on preparing parts for bagging with bleeders, thermocouples, probes, and vacuum connections, and performing vacuum bag processing, bonding, and oven/autoclave curing. Join a driven team of pioneers relentlessly tackling challenging projects, delivering on the impossible, and making an impact on the future of space!WHAT YOU'LL GET TO DO:<ul><li>Assembly of structures including setup, bonding and fastener applications&nbsp;</li><li>Laminate assemblies by determining proper placement of composite materials&nbsp;</li><li>Prepare parts for bagging, including placement of bleeders, thermocouples, probes and vacuum connections&nbsp;</li><li>Vacuum bag processing, bonding, and oven/autoclave curing&nbsp;</li><li>Making basic layouts on parts or assemblies in order to establish reference points and to check dimensions using calipers, micrometers, precision scales and torque wrenches&nbsp;</li><li>Fitting of Honeycomb, foam and syntactic core&nbsp;&nbsp;</li><li>Fitting and refurbishment of thermal protection systems.&nbsp;&nbsp;</li><li>Integration of mechanical hardware&nbsp;&nbsp;&nbsp;</li><li>Perform other standard composite and integration building techniques and practices as industries such as aerospace, space and other composite workplaces demand.&nbsp;&nbsp;</li><li>You may be requested to work on other products for Rocket Lab in the local area or travel as required.&nbsp;</li></ul>(Please note: this position can be hired at the Composites Technician I, Composites Technician II, Composites Technician III, or Composites Technician IV level)&nbsp; &nbsp;YOU'LL BRING THESE QUALIFICATIONS AS A COMPOSITES TECHNICIAN I:<ul><li>2+ years of experience with composites or laminations OR&nbsp;</li><li>2+ years of military equipment maintenance experience OR&nbsp;</li><li>2+ years of experience in electronics, mechanical troubleshooting, installation, repair of manufacturing equipment&nbsp;</li><li>High School Diploma or GED&nbsp;&nbsp;</li></ul>YOU'LL BRING THESE QUALIFICATIONS AS A COMPOSITES TECHNICIAN II:<ul><li>5+ years of experience with composites or laminations OR&nbsp;</li><li>5+ years of military equipment maintenance experience OR&nbsp;</li><li>5+ years of experience in electronics, mechanical troubleshooting, installation, repair of manufacturing equipment&nbsp;</li><li>High School Diploma or GED&nbsp;&nbsp;</li></ul>YOU'LL BRING THESE QUALIFICATIONS AS A COMPOSITES TECHNICIAN III:<ul><li>8+ years of experience with composites or laminations OR&nbsp;</li><li>8+ years of military equipment maintenance experience OR&nbsp;</li><li>8+ years of experience in electronics, mechanical troubleshooting, installation, repair of manufacturing equipment&nbsp;</li><li>High School Diploma or GED&nbsp;&nbsp;</li></ul>YOU'LL BRING THESE QUALIFICATIONS AS A COMPOSITES TECHNICIAN IV:<ul><li>12+ years of experience with composites or laminations OR&nbsp;</li><li>12+ years of military equipment maintenance experience OR&nbsp;</li><li>12+ years of experience in electronics, mechanical troubleshooting, installation, repair of manufacturing equipment&nbsp;</li><li>High School Diploma or GED&nbsp;&nbsp;</li></ul>THESE QUALIFICATIONS ARE NICE TO HAVE:<ul><li>8+ years of experience with composites or laminations</li><li>Basic Math Skills&nbsp;</li><li>Knowledge of the following tool use (or if no previous experience, open to training on):&nbsp;<ul><li>Pneumatic tools&nbsp;</li><li>Caliper&nbsp;</li><li>Micrometers&nbsp;</li><li>Hand tools&nbsp;</li><li>Power tools&nbsp;</li><li>Precision measurement instruments&nbsp;</li><li>familiarity working with and conforming to drilling, laminating, and assembly prints&nbsp;</li><li>Experience working with material data sheets&nbsp;</li></ul></li><li>Shop organization and cleanliness&nbsp;</li><li>Use of personal protective equipment&nbsp;</li></ul>ADDITIONAL REQUIREMENTS:<ul><li>Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position</li><li>Able to lift up to 25lbs. unassisted</li><li>Must be able to climb ladders and be comfortable working in tight spaces.</li><li>Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls.</li><li>Must be able to walk or stand for extended periods – 8 hours min&nbsp;</li><li>Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces&nbsp;</li></ul>#RL1WHAT TO EXPECT&nbsp;We’re on a mission to unlock the potential of space to improve life on Earth, but that’s not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other’s backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way.&nbsp;&nbsp;&nbsp;Important information:FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY:To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here.Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at <a href="mailto:g.biow@rocketlabusa.com.This" target="_blank">g.biow@rocketlabusa.com.This</a> dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days.FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY:For security reasons background checks will be undertaken prior to any employment offers being made to an applicant.&nbsp; These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations.&nbsp;Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality.&nbsp; For more information on these Regulations, click here&nbsp;ITAR Regulations.

Rocket Lab

Technician I-IV, Composites

As a jewelry studio technician, you will mentor students outside of class time and regular business hours. Responsibilities include daily task development with the shop/studio manager, overseeing shop functionality, and providing hands-on support to students with fabrication and file issues. You will manage equipment maintenance schedules, inventory all materials, and monitor the studio and tool room during open shop hours. Additional responsibilities include checking tools in and out according to SCAD policies and performing machine setup and light maintenance.You will maintain an updated user database, assist professors during class sessions — which may include demonstrating proper equipment use — and provide minor first aid if necessary. In this role, you will inform the shop manager about maintenance, supply, and safety issues while upholding a safe workspace by enforcing all OSHA, EPA, and SCAD safety policies and procedures.The ideal candidate demonstrates basic computer skills and a comprehensive understanding of jewelry shop tools and techniques, including lost wax casting, acetylene torches, fabrication techniques, soldering, and stone setting. The candidate must be able to maintain an organized and clean work environment.Minimum Qualifications:     &nbsp;<ul><li>Bachelor’s degree</li><li>At least three years of professional experience as a bench jeweler or technician</li><li>Proficient in Rhino, Matrix, ZBrush, as well as Adobe Illustrator, Photoshop, and/or similar software</li></ul>Preferred Qualifications:     &nbsp;<ul><li>Specialization in 3D printing and lost wax casting processes</li></ul>Certificates, licenses, and registrations:&nbsp;&nbsp;<ul><li>Valid driver’s license</li></ul>Travel Required:&nbsp;&nbsp;<ul><li>  Less than 10%&nbsp;</li></ul>Work Hours: The university work week is Sunday through Saturday. Most offices are open Monday through Friday 8:30 a.m. to 5:30 p.m. To accommodate business needs, employees may be assigned to other workdays and/or hours, including weekends and evenings.   &nbsp;&nbsp;ADA Tag: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements and minimum qualifications listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions and/or meet the minimum qualifications. &nbsp;

Savannah College of Art and Design

Jewelry Studio Technician

Astound Broadband, the sixth-largest telecommunications provider in the United States, is a leading supplier of cutting-edge technology and communications services—and applicants like you make it all possible. To develop your career, we provide one-on-one training and coaching, a supportive work environment and the opportunity to represent a superior telecommunications company.Additionally, we offer a robust benefits package, including rewards, recognition and employee discounts to ensure your continued success. With us, you’ll stay empowered to do your best work by creating astounding possibilities for local communities and beyond.Where you will work:This position will be based in Astounds Rocklin, CA office A Day in the Life of the Construction Technician:<ul><li>Perform construction work including coaxial placement, splicing, MDU work including the placement of molding and drop cable, and underground work including service tie-ins.</li><li>Assist in construction projects including relocations, new developments, MDUs, commercial and residential projects.</li><li>Perform all work as necessary to conform to quality control guidelines (includes compliance with requirements outlined in applicable regulations such as: OSHA, FCC, and NEC, etc. and following procedures as outlined in the Installation, Technical, Operations, and Safety Manuals, and Employee Handbook).</li><li>Experience with and ability to establish traffic control setups for various lane configuration scenarios as necessary to complete job responsibilities.</li><li>Familiarity with and experience using utility locating devices.</li><li>Hands on experience related to various construction functions including cable and molding placement, splicing, conduit placement asphalt, concrete and grass restoration.</li><li>Experience with and the ability to read industry standard mapping such as AutoCAD and GIS. </li><li>Familiarity with basic computer skills such as Microsoft Excel,&nbsp; Word and Google.</li><li>Experience with and the ability to load and unload a construction trailer, Fiber &amp;</li><li>Coax reel trailers. Experience and the ability to run small excavating equipment,</li><li>Shovel, Hole hog, tow behind Air compressor and various other small tools and equipment related to industry standard construction projects</li><li>Other duties as assigned</li></ul> What You Bring to the Table:<ul><li>High school diploma or general education degree (GED) with basic knowledge and aptitude in electronics; previous experience utilizing mechanical and/or technical capacity preferred.</li><li>Minimum of one year in telecommunications or related field preferred. Ability to read and comprehend RF/fiber design and underground infrastructure drawings.</li><li>Experience estimating and project management preferred.</li><li>Excellent communication skills necessary to interact with customers, property managers, building engineers, City and governmental entity representatives.</li><li>Experience with and ability to establish traffic control setups for various lane configuration scenarios as necessary to complete job responsibilities.</li><li>Familiarity with and experience using utility locating devices.</li><li>Hands on experience related to various construction functions including cable and molding placement, splicing, conduit placement asphalt, concrete and grass restoration.</li><li>Ability to read, write and comprehend simple instructions. Ability to effectively present information in one-on-one and small group situations to customers, and other employees of the organization.</li><li>Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.</li><li>Ability to apply common sense understanding to carry out detailed written or oral instructions.</li><li>Must be committed to providing exceptional customer service (both external and internal) at all times.</li><li>While performing the duties of this job, the employee must be able to perform duties at heights of up to 40'. The employee must frequently lift and/or move up to 70 pounds. Able to work within the specifications, limitations and confines of a ladder.</li><li>While performing the duties of this job, the employee is regularly exposed to outside weather conditions, risk of electrical shock, and vibration. The employee is occasionally exposed to high, precarious places. The noise level in the work environment is usually moderate. Ability to work within limited confines, such as crawl spaces.</li></ul>Education and Certifications:<ul><li>High school diploma or equivalent</li><li>Valid driver’s license and satisfactory driving record as determined by the Company.</li></ul> We're Proud to Offer a Comprehensive Benefits Package Including:<ul><li>401k retirement plan, with employer match</li><li>Insurance options including: medical, dental, vision, life and STD insurance</li><li>Paid Time Off/Vacation: Starting at 80 hours per year, and increases based on tenure with the organization</li><li>Floating Holiday: 40 hours per year</li><li>Paid Holidays: 7 days per year</li><li>Paid Sick Leave: Astound allows a number of paid sick hours per calendar year and varies based on state and/or local laws</li><li>Tuition reimbursement program</li><li>Employee discount program</li></ul>*Benefits listed above are for regular full-time positionsBase Salary: The base salary range in California for this position is $20.00- $29.40 (per hour), plus opportunities for bonus, benefits and commission, if applicable. The base pay range represents the low and high end of the hiring range for this job. Actual pay will vary and may be above or below the range based on various factors including but not limited to relevant skills, experience, and capabilities. It is specific to California and may not be applicable to other locations.Construction Technician 1- $20.00 - $28.00 per hour Construction Technician 2- $21.00 - $29.40 per hourOur Mission Statement:* Take care of our customers * Take care of each other * Do what we say we are going to do * Have fun Diverse Workforce / EEO: Astound Broadband is proud to be an Equal Opportunity Employer and we are dedicated to cultivating a diverse, equitable and inclusive workplace where employees feel valued, respected and empowered. Discrimination of any kind has no place here. We are dedicated to providing equal opportunities for all employees and applicants, regardless of race, color, religion, sex, pregnancy, national origin, age, physical and mental disability, marital status, sexual orientation, gender identity or expression, genetic information, military, veteran status, and any other characteristic protected by applicable law. We strive to create a culture that celebrates our differences and promotes fairness and inclusivity in all aspects of our business.FCO (For San Francisco Candidates Only): Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. CCPA Employee Privacy Policy (For California Candidates Only): <a href="https://www.astound.com/wp-content/uploads/2023/09/CCPA-Employee-Privacy-Notice.pdf" target="_blank">https://www.astound.com/wp-content/uploads/2023/09/CCPA-Employee-Privac…</a>

Astound Broadband

Astound

Construction Technician I or II

Astound Broadband, the sixth-largest telecommunications provider in the United States, is a leading supplier of cutting-edge technology and communications services—and applicants like you make it all possible. To develop your career, we provide one-on-one training and coaching, a supportive work environment and the opportunity to represent a superior telecommunications company.&nbsp;&nbsp;Additionally, we offer a robust benefits package, including rewards, recognition and employee discounts to ensure your continued success. With us, you’ll stay empowered to do your best work by creating astounding possibilities for local communities and beyond.&nbsp;Entrepreneurial yet established and growing organization where you can make a true impact!Where you will work:&nbsp;This position will be based in Wilsonville, OR office.A Day in the Life of the Broadband Technician:<ul><li>Residential install and disconnects* (data, video, phone) on customer premises</li><li>Ensure/record correct RF and signal levels within specifications</li><li>Communication with leadership and dispatch as needed</li><li>Customer education</li><li>Operate company vehicle in safe and responsible manner</li><li>Other duties as assigned</li></ul>What You Bring to the Table:<ul><li>Experience: 0 (Entry Level)</li><li>Competencies: Maintain satisfactory driving record and have a valid driver's license</li><li>Knowledge, Skills and Abilities: Ladder; Hand or Power Tools; Customer Service; Communication (verbal, written); Basic Computer Skills; Aptitude to learn to skills; Problem solving; Time Management; Teamwork; Working alone</li></ul>Education and Certifications:<ul><li>High school diploma or equivalent</li><li>Must possess a valid driver's license with a satisfactory driving record compliant with the company policy</li></ul>We're Proud to Offer a Comprehensive Benefits Package Including:<ul><li>401k with employer match</li><li>Insurance options including: medical, dental, vision, life and STD insurance </li><li>Paid Time Off/Vacation: 80 hours per year and increases based on tenure with the organization (**PTO/Vacation is specific to our West region and could vary within other geographical regions.)</li><li>Paid Holidays: 7 days per year</li><li>Paid Sick Leave based on state and local ordinance (**Sick leave is specific to our West region and could vary within other geographical regions.)</li><li>Tuition reimbursement program</li><li>Employee discount program</li></ul>*Benefits listed above are for regular full-time positions&nbsp;The base pay range represents the low and high end of the hiring range for this job. Actual pay will vary and may be above or below the range based on various factors including but not limited to relevant skills, experience, and capabilities. The base salary range in Oregon for this position, plus opportunities for bonus, benefits and commission, if applicable, is:<ul><li>Broadband Technician I - $20.00 - $28.00 per hour</li><li>Broadband Technician II - $21.00 - $29.40 per hour</li><li>Broadband Technician III - $22.05 - $30.87 per hour</li></ul><h4>Our Mission Statement:</h4>* Take care of our customers* Take care of each other* Do what we say we are going to do* Have funDiverse Workforce / EEO:Astound Broadband is proud to be an Equal Opportunity Employer. We embrace, support, and thrive on each other’s differences to maximize the experience of our teammates and our community.&nbsp; We are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law.FCO (For San Francisco Candidates Only): Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records.CCPA Employee Privacy Policy (For California Candidates Only):&nbsp;<a href="https://www.astound.com/wp-content/uploads/2023/09/CCPA-Employee-Privacy-Notice.pdf&nbsp;&amp;nbsp" target="_blank">https://www.astound.com/wp-content/uploads/2023/09/CCPA-Employee-Privac…</a>; &nbsp;

Broadband Technician I

Join the Clean Energy RevolutionBecome&nbsp;a&nbsp;Meter Technician 1A&nbsp;at Southern California Edison (SCE) and build a better tomorrow. In this job, you’ll repair, test, and calibrate all types and classes of single phase and non-IDR (interval data recording) Polyphase Meters in our Meter Acceptance Shop and in the field. You will also inspect internal/external connections and test for continuity and grounds. As a&nbsp;Meter Technician 1A, your work will help power our planet, reduce carbon emissions and create cleaner air for everyone. Are you ready to take on the challenge to help us build the future?Responsibilities<ul><li>Inspects/validates mechanical, electrical, electronic, and communication components.</li><li>Cleans, reconditions, repairs, or replaces defective parts.</li><li>Verifies register ratios and meter constants.</li><li>Uses test instruments to perform testing and evaluation of associated metering equipment and load survey devices.</li><li>Tests insulation of meters and associated metering equipment, such as, but not limited to test switches, phasing transformers, and load survey devices at high potential.</li><li>Performs meter tests using various types of tests and computes meter error.</li><li>Adjusts as needed to bring accuracy within prescribed limits.</li><li>Checks, verifies, and updates meter nameplate data and meter programs.</li><li>Records test results in SCE systems.</li></ul> Minimum Qualifications<ul><li>Experience fixing mechanical, electrical, or electronic equipment.</li><li>Possess a current valid Driver’s License. </li></ul>Preferred Qualifications<ul><li>Experience and working knowledge with Electronics and/ or Electrical Theory.</li><li>Certificate or Degree in Electrical Engineering Mechanical Engineering, or education in a&nbsp;related technical field.</li><li>Experience as a commercial/residential electrician, or in electrical construction.</li><li>Experience working with power tools and hand tools (e.g., socket wrenches, screwdrivers, splicer, wire cutter, etc.)</li><li>Ability to bend and lift assets up to 50 lbs.</li><li>Experience and proficiency with Microsoft Office suite including Word, Excel, and Outlook.</li><li>Experience and proficiency performing advanced Microsoft Excel functions, including performing: VLOOKUP’s, Pivot Tables, Mathematical Computations, filtering/sorting, charts and graphing.</li><li>Experience and ability to perform mathematical computations and algebra calculations to check, verify, and update data.</li><li>Experience and ability tabulating test results and performing computations for statistical analysis from testing data.</li><li>Experience testing and repairing Single Phase and Polyphase Meters associated metering equipment and load survey devices.</li><li>Strong communication and interpersonal skills to interface customers.</li></ul>Additional Information<ul><li>This position’s work mode is&nbsp;on-site. The employee will report to an SCE facility or in the field location.&nbsp; Further details of this work mode will be discussed at the interview stage. The work mode can be changed based on business needs.</li><li>Visit our&nbsp;Candidate Resource&nbsp;page to get meaningful information related to benefits, perks, resources, testing information, hiring process, and more!</li></ul><ul><li>Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act.</li><li>Relocation does not apply to this position.</li><li>This position requires testing and applicants who are identified to continue through the selection process will be invited to test via email. Reference our&nbsp;Information Guides&nbsp;for the following tests:&nbsp;Meter Technician 1 &amp; 1A (Test 2605), and EEI CAST (Test 5108).&nbsp; Candidates who have previously passed these assessment(s), in some cases, may not need to retest again for this position.</li></ul>About Southern California EdisonThe people at SCE don't just keep the lights on. Our mission is so much bigger. We’re fueling the kind of innovation that’s changing an entire industry, and quite possibly the planet. Join us and create a future with cleaner energy, while providing our customers with the safety and reliability they demand. At SCE, you’ll have a chance to grow personally and professionally, making a real impact in Southern California and around the world.At SCE, we celebrate our differences. We are a proud Equal Opportunity Employer and will not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or any other protected status.We are committed to ensuring that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodations at (833) 343-0727.

Southern California Edison

Meter Technician 1A

Feel Seen at Thrive!Community Information: Learn more about&nbsp;Briggs Village&nbsp;here.Salary:$23-$24 an hour DOE&nbsp;Schedule:&nbsp;Full-time;Monday - Friday 9 am - 6 pmOur purpose is to create a community where people feel seen, because we believe&nbsp;when people feel seen, they thrive. By cultivating award-winning workplaces, we foster an environment of connection, compassion and fun that our personnel extend to everyday life at their communities. Happy, inspired associates lead to happy, supported residents. We are dedicated to our boutique, at-scale approach to property management and building communities that flourish, which stems from hiring strong associates to grow with Team Thrive! Voted one of Washington's best workplaces 8 years in a row, and Portland’s best workplaces 2 years in row,&nbsp;Thrive builds on its culture by offering the following benefits:&nbsp;<ul><li>33 Paid Days off Per Year (PTO, Paid Holidays, Personal Day, Days of Service, and Birthday). Additional PTO accrued with tenure. <ul><li>Employer Matched 401k plan</li><li>Rental Discount&nbsp;for select roles/properties with approval</li><li>Eligible for earned commissions</li><li>Health benefits effective 1st of the month following your start date!</li><ul><li>$0 premium medical, dental, and vision insurance for eligible associates</li><li>Dental plan with coverage for adult and child orthodontics </li></ul><li>Fully covered life insurance policy with supplemental Life Insurance options</li><li>Fully covered Long-term disability insurance</li><li>24/7 Everyday Assistance Program (EAP)</li><li>Voluntary Critical Illness, Accident,&nbsp;Hospital&nbsp;Indemnity,&nbsp;and Short-term Disability insurance</li><li>Pet&nbsp;Insurance discounts</li><li>Parking &amp; Transit Commuter Benefits </li><li>Annual professional development reimbursement</li><li>Training opportunities and career progression/growth plans!</li></ul></li></ul>Maintenance Technician&nbsp;Purpose:The Maintenance Technician I is to assist the Maintenance Supervisor and/or Maintenance Team in maintaining the physical integrity of the community, in a manner consistent with Thrive’s Values. This involves ensuring a safe, secure, and comfortable living environment for residents, visitors and staff. The maintenance Technician will carry out assigned duties in a safe manner and other duties as requested by the Maintenance Supervisor. In the absence of the Maintenance Supervisor, the Maintenance Technician will assume all maintenance responsibilities.&nbsp;Maintenance&nbsp;Technician Job Responsibilities:<ul><li>Schedules and performs routine preventative maintenance on all appropriate equipment and tools as directed by Maintenance Supervisor and Community Manager.</li><li>Diagnoses and performs minor or routine maintenance and repairs within homes and throughout the property.</li><li>Inspects and helps coordinate all needed make-ready repairs and services.</li><li>Assists in keeping grounds neat and free of litter.</li><li>Performs any additional duties assigned by Maintenance Supervisor and Community Manager.</li><li>Contributes to a positive team environment and happy resident base.</li></ul>Maintenance Technician Qualifications:<ul><li>Prior maintenance experience in property management strongly preferred, but not required</li><li>Proficient in unit turns and appliance repair is a plus</li><li>Excellent customer service skills</li><li>Strong team player</li><li>Willingness to learn and take initiative on tasks and projects</li><li>Weekends/listed schedule days are required</li><li>Must have valid driver's license and automobile insurance coverage</li><li>Supplies their own tools</li></ul>If you do not fully meet the qualifications listed above but feel you have the skills and experience to be able to be successful in this position, we welcome your application! Whether this or another position within Thrive, we would love to help you find the right role in our organization.&nbsp;Physical Requirements<ul><li>This position requires the ability to stand and walk or sit alternatively depending on the specific needs of the day. Estimated 66% - 100% of time is spent on feet and sitting at desk.</li><li>Frequent need to type, write, &amp; grasp (working at a computer, answering phones, arranging maintenance shop, etc.)</li><li>Occasional to frequent need to bend/stoop/squat, climb stairs, push or pull, and reach above shoulder (cleaning grounds and property, painting, performing work orders, etc.)</li><li>Ability to lift/move/push/pull up to 150 lbs. with adequate support and tools, on occasion, with a frequent need to lift/push/pull 25-75lbs. </li><li>Must follow safety protocols and wear appropriate Personal Protective Equipment (PPE) at all times.</li><li>For more information regarding the work environment and physical and mental requirements, please contact <a href="mailto:careers@thrivecommunities.com" target="_blank">careers@thrivecommunities.com</a>.</li></ul>Equal Employment OpportunityDiversity is celebrated at Thrive as we believe it makes us a better company. Our hope is that each associate feels welcomed, respected, and appreciated for their unique contributions. From our hiring practices, performance reviews, raise decisions, and opportunities for promotions, Thrive follows consistent and fair practices to ensure all Thrive employees and potential employees have an equal opportunity for employment and advancement based on merit, and are not discriminated against because of race, color, religion, national origin, age, sex, veteran status, pregnancy, childbirth, pregnancy-related conditions, disability, gender, gender identity, sexual orientation, or on any other legally protected basis. Our Human Resources department works with teams to make reasonable accommodations for those that require assistance in being able to participate in the interview process or meet the requirements of their position.Background Check &amp; Drug Screen PolicyThrive Communities conducts background checks and drug screens for onsite property associates after the conditional offer of employment is accepted, in compliance with applicable federal, state, and local laws. Candidates will be asked to authorize these screenings and results will be reviewed by a designated HR representative. For questions about what will be reviewed on the criminal history, please contact <a href="mailto:careers@thrivecommunities.com" target="_blank">careers@thrivecommunities.com</a>.The 4-panel drug screen tests for the following:<ul><li>Amphetamines including Methamphetamine</li><li>Cocaine Metabolites</li><li>Opiates including Codeine and Morphine</li><li>Phencyclidine ("PCP")</li></ul>Thrive Communities reserves the right to modify this policy at any time without notice.

Thrive Communities

Maintenance Technician I

Job Title Materials Management Technician/UKHC Requisition Number RE50037 Working Title Materials Management Technician Department Name H3230:Materials/Purchasing Services Work Location Lexington, KY Grade Level 06 Salary Range $16.20-24.82/hour Type of Position Staff Position Time Status Full-Time Required Education HS Click here for more information about equivalencies: <a href="https://hr.uky.edu/employment/working-uk/equivalencies" target="_blank">https://hr.uky.edu/employment/working-uk/equivalencies</a> Required Related Experience No experience required. Required License/Registration/Certification None Physical Requirements This position requires regularly performing tasks with repetitive motions (such as typing); lifting, pushing, and/or pulling objects weighing up to or over 50 pounds; standing or walking with objects weighing up to 10 pounds; intermittently standing or walking with objects weighing up to 25 pounds; and occasionally sitting at a computer workstation for extended periods of time; and working at heights above four feet and/or in confined spaces. Also involves some exposure to risk of injury from moving, lifting, or positioning patients, equipment, or materials, and exposure to loud noises and cuts/punctures. Shift 11:00 a.m. – 7:00 p.m. Must be able to workdays, evenings, weekends, holidays, and/or overtime in order to meet job and departmental business needs. Job Summary This position will provide support to all clinical areas as it relates to the ordering, delivery, and stocking of all patient equipment and supplies. The primary responsibilities will include maintaining accurate inventory control; verifying receipts and entry into a computer system; pulling and recording all recalled products; and tagging, documenting, and delivering all capital equipment purchases. In addition, this position will organize work areas to support clinician requests by listening, understanding, and following through on requests. Other duties include ensuring work environment is clean and safe; attending and participating in all emergency requests and codes; coordinating the needs for training on the supply system; and adhering to all policies and procedures. The starting pay for this position was recently adjusted. The minimum hourly rate for this position will now be $17.05/hour. All pay rates will be based on candidate’s experience. Skills / Knowledge / Abilities The ideal candidate will possess the following: exceptional customer service, planning and organization, time management, attention to detail, listening, and communication skills. In addition, this individual needs to have the ability to perform under pressure and meet deadlines.&nbsp; Does this position have supervisory responsibilities? No Preferred Education/Experience High school diploma and at least six months of inventory, stocking, receiving, warehousing, or related experience; knowledge of Microsoft Excel and Word; and experience using point-of-use systems preferred.&nbsp; Deadline to Apply 04/27/2025 Our University Community We value the well-being of each of our employees and are dedicated to creating a healthy place for everyone to work, learn and live. In the interest of maintaining a safe and healthy environment for our students, employees, patients and visitors the University of Kentucky is a Tobacco &amp; Drug Free campus. As an Equal Opportunity Employer, we strongly encourage veterans, individuals with disabilities, women, and all minorities to consider our employment opportunities. Any candidate offered a position may be required to pass pre-employment screenings as mandated by University of Kentucky Human Resources. These screenings may include a national background check and/or drug screen.

Materials Management Technician/UKHC

Job Title Bus Driver Requisition Number RE49363 Working Title Department Name 3T000:Transportation Services Work Location Lexington, KY Grade Level 40 Salary Range $15.30-24.50/hour Type of Position Staff Position Time Status Full-Time Required Education HS Click here for more information about equivalencies: <a href="https://hr.uky.edu/employment/working-uk/equivalencies" target="_blank">https://hr.uky.edu/employment/working-uk/equivalencies</a> Required Related Experience No experience required. Required License/Registration/Certification Commercial Driver’s License (CDL) Physical Requirements Lifting objects up to 25lbs., sitting for long periods of time. Shift 1:00pm – 9:00pm Monday- Friday Job Summary Drivers provide courteous, friendly, and reliable on-campus transportation to employees, students, guests and assist disabled individuals as needed, thereby reducing intercampus traffic. Skills / Knowledge / Abilities CDL with Passenger Endorsement Does this position have supervisory responsibilities? No Preferred Education/Experience 1 yr driving a CDL vehicle preferred. Deadline to Apply 04/28/2025 Our University Community We value the well-being of each of our employees and are dedicated to creating a healthy place for everyone to work, learn and live. In the interest of maintaining a safe and healthy environment for our students, employees, patients and visitors the University of Kentucky is a Tobacco &amp; Drug Free campus. As an Equal Opportunity Employer, we strongly encourage veterans, individuals with disabilities, women, and all minorities to consider our employment opportunities. Any candidate offered a position may be required to pass pre-employment screenings as mandated by University of Kentucky Human Resources. These screenings may include a national background check and/or drug screen.

Bus Driver

Job Title Nursing Care Technician/UKHC Requisition Number RE50029 Working Title NCT - 6100 Universal Department Name H7000:Trauma and Acute Care Surgery Services Work Location Lexington, KY Grade Level 06 Salary Range $16.20-24.82/hour Type of Position Staff Position Time Status Full-Time Required Education HS Click here for more information about equivalencies: <a href="https://hr.uky.edu/employment/working-uk/equivalencies" target="_blank">https://hr.uky.edu/employment/working-uk/equivalencies</a> Required Related Experience No experience required. Required License/Registration/Certification Have one or more of the following: 1. Kentucky Registered State Registered Nurse Assistant (SRNA), for Emergency Department (ED)- KY Registered State Registered Nurse Assistant (SRNA) or Emergency Medical Technician (EMT) 2. Registered Nurse (RN) nursing student who has completed first fundamental course and a clinical 3. Military Medic 4. current/active Licensed Practical Nurse (LPN) license 5. Acquired Nursing Care Technician (NCT) competencies through continuous employment at the University of Kentucky; 6. Successful completion of the Earn While You Learn NCT Training Program within 8 weeks of hire; plus American Heart Association (AHA) Basic Life Support certification for the Healthcare Provider valid at time of hire, or completion of certification during Earn While You Learn NCT Training Program. Physical Requirements This position requires regularly sitting at a computer workstation for extended periods of time and performing tasks with repetitive motions (such as typing); lifting, pushing, and/or pulling objects weighing up to or over 50 pounds; and standing or walking with objects weighing up to 10 pounds; occasionally requires standing or walking with objects weighing up to 25 pounds and/or working in confined spaces. Also involves some exposure to risk of injury from moving, lifting, or positioning patients, equipment, or materials; and exposure to loud noises, temperature extremes, hazardous chemicals and fumes including waste, radiation, burns, cuts/punctures, blood-borne or airborne pathogens, and/or combative/violent people. Shift Must be able to work three 12.5-hour shifts per week (7:00 p.m. – 7:30 a.m.) Will also be required to work some weekends and holidays. Job Summary This position works one-on-one with a Registered Nurse (RN) to complete delegated tasks and provide direct patient care such as: obtain vital signs, phlebotomy, documentation, assist with ADL’s (activities of daily living), order and stock supplies, respond to patient call lights, unit orientation, and patient admission, transfer, and discharge. Positions may also involve moving patients from bed to wheelchair or stretcher, or stretcher to treatment/surgical tables. Handling of specimens and delivery to labs and preparation of patients for surgical procedures may also be required. The primary responsibilities for this position consist of providing prompt, compassionate, and patient centered care in a collaborative, team-oriented work environment. This dynamic environment supports collaborative efforts among the nursing staff and the teams of physicians to increase communication, follow through, and enhance patient outcomes and satisfaction. This includes utilization of the nursing process in conjunction with a comprehensive patient-centered plan of care, ensuring patient satisfaction and adhering to University policies and procedures as well as federal, state and local regulations. In addition, the essential functions for this position include the ability to lift, carry, push, and pull 50-100 pounds on a daily basis, as well as stand, walk, and sit for long periods of time. The conditions of work may involve exposure to communicable diseases and injury from intractable patients or sharp instruments. Please apply for any and all positions for which you feel qualified. If you do not apply for a specific position, you cannot be considered for the position. The starting pay for this position was recently adjusted. The minimum hourly rate for this position will now be $18.20/hour. All pay rates will be based on candidate’s experience.&nbsp; Skills / Knowledge / Abilities The ideal candidate will be compassionate, honest, trustworthy, and have a strong work ethic. Must enjoy working in a team and also be able to take direction and communicate effectively with staff, patients and their family members. In addition, must also be confident and enjoy working in a fast paced environment. Knowledge of CPR and basic concept of abnormal vital sign parameters is a must. Candidate will also need strong organizational, prioritization, basic computer navigation skills, and working knowledge of the Internet. American Heart Association (AHA) Basic Life Support certification for the Healthcare Provider valid at time of hire is required. Does this position have supervisory responsibilities? No Preferred Education/Experience Previous hospital experience is preferred. Deadline to Apply 04/27/2025 Our University Community We value the well-being of each of our employees and are dedicated to creating a healthy place for everyone to work, learn and live. In the interest of maintaining a safe and healthy environment for our students, employees, patients and visitors the University of Kentucky is a Tobacco &amp; Drug Free campus. As an Equal Opportunity Employer, we strongly encourage veterans, individuals with disabilities, women, and all minorities to consider our employment opportunities. Any candidate offered a position may be required to pass pre-employment screenings as mandated by University of Kentucky Human Resources. These screenings may include a national background check and/or drug screen.

1, 109 Technician Jobs